IMALENT DT70 is a versatile USB rechargeable LED tactical flashlight with multi-level output and OLED display. The OLED display can show battery voltage, output, charging, and has a flashing overheat warning, which makes it much easier and more simple to know the status of the flashlight. Utilizing the latest CREE XHP70 LED, its aluminum OP reflector helps distribute the beam more evenly, and can output up to 16,000 lumens. There are four output levels, with the tactical-switch button making it easy to operate.
Supported by 4pcs of IMALENT 18650 Li-ion rechargeable batteries, its advanced temperature control module, low-voltage warning. and low-power protection, makes the DT70 the perfect flashlight for any demanding environment or scenario.
Utilizes the latest CREE XHP70 LEDs, with a lifespan up to 50000 hours with maximum output of 16000 lumens. Includes a built-in USB charging interface
The OLED display can show various parameters
Product size: 146(length)*70 (head diameter) *50 (diameter) mm
High efficiency constant power circuit will maintain constant brightness
Anti-reverse battery protection
Built-in thermal control module will automatically adjust the brightness output
according to the working state and outer temperature
Combination of toughened ultra-clear mineral and anti-reflective coating glass
Aluminum OP reflector
Aerospace-grade aluminum alloy body, wear-resistant Type III hard-anodized surface
IPX-8 standard waterproof (2 meters submersible)
1.5m impact resistant
Tail stand function
Battery installation :
Unscrew the middle of flashlight body by rotating counter clockwise.
Insert four high drain 18650 Li-ion rechargeable batteries with the positive pole pointing towards the head of LED.
Screw the flashlight body back, when the OLED display shows IMALENT, this means the flashlight is ready to use.
Specially insert one to three cells of 18650 Li-ion rechargeable battery the flashlight is ready to use.
Battery Charging :
Plug in one end of the USB cable into an AC adapter (5V1A-5V2A, recommended 5V 2A). Then plug in the AC adapter into an electrical outlet. Remove the anti-dust plug at the head of your DT70 flashlight. Then plug the USB cable into the Micro USB charging port at the head of the flashlight. Charging 4pcs 18650 batteries with a 2A adapter will take about eight hours.
When DT70 is being charged properly, the OLED display will show charging progress symbol. The LED indicator displays five symbols if the batteries have reached 4.2V. It will then stop automatically after 5 seconds.
If the DT70 is charged abnormally (batteries damaged or wrong), the charger will stop charging automatically.
1*USB Charging Line
4*3000mAh 18650 Recahrgeable Li-ion Battery
Use spaces to separate tags. Use single quotes (') for phrases.